The PGP Ultra takes the foundation of the best-selling PGP Rotor and raises the bar with a variety of new features developed over three decades of research, customer feedback, and lab testing. Among the most notable improvements of the PGP Ultra is its non-strippable drive and automatic arc return. These two features work to allow the turret to be turned without causing damage, and return the turret to its original arc regardless of where it is turned. Other advanced features include 34 nozzle options with several radius choices, and a headed slot and set screw. The diversity of the PGP Ultra offers system installers an array of efficient options on any site.
-
Models: Shrub, 10 cm, 30cm
-
Arc setting: 50 to 360 degrees
-
Factory installed rubber cover
-
Through-the-top arc adjustment
-
Quick check arc mechanism
-
Water lubricated gear-drive
-
Nozzle choices: 34
-
Nozzle racks: 1.5 to 8.0 Blue, 2.0 Low Angle to 4.0 Low Angle Grey, 0.50 Short Radius to 3.0 Short Radius Black, 6.0 to 13.0 Green, MPR-20, MPR-30, MPR-35
-
Warranty period: 5 years
ADVANCED FEATURES
AUTOMATIC ARC RETURN
This patented feature returns the turret to the original arc regardless of where it is turned. This ensures vandal protection in any environment.
NON-STRIPPABLE DRIVE
The patented, non-strippable, vandal proof drive mechanism enables the turret to be turned without causing damage.
PART- AND FULL-CIRCLE IN ONE MODEL
Patented non-reversing 360 for part- and full-circle in one model, from 50 to 360 degrees.
HEADED AND SLOTTED SET SCREW
Use a slotted screwdriver or the Hunter wrench for easier and simpler adjustments as needed.
DRAIN CHECK VALVE (UP TO 3.0 M OF ELEVATION)
As air in the system piping can cause long-term damage to rotors and plumbing, the drain check valve keeps lines from draining when the system is shut off. This saves water, reduces liability, and increases system life.
Exposed Diameter: 4.5 cm
Inlet Size: ¾" BSP
Pop-up Height: 10 cm
Exposed Diameter: 4.5 cm
Inlet Size: ¾" BSP
Pop-up Height: 30 cm
Exposed Diameter: 4.5 cm
Inlet Size: ¾" BSP
Operating Specifications
- Radius: 4.9 to 14.0 m
- Flow rate: 0.07 to 3.23 m3/hr; 1.2 to 53.8 l/min
- Recommended pressure range: 1.7 to 4.5 bar; 170 to 450 kPa
- Operating pressure range: 1.4 to 7 bar; 140 to 700 kPa
- Precipitation rates: 10 mm/hr approx.
- Nozzle trajectory: Std = 25 degrees, Low angle = 13 degrees
PGP Ultra / I-20 Blue Standard Nozzle Performance Data |
|||||||
---|---|---|---|---|---|---|---|
Nozzle | Pressure | Radius | Flow | Precip mm/hr | |||
bar | kPa | m | m³/hr | l/min | |||
1.5 •
Blue
|
1.7 | 170 | 8.8 | 0.27 | 4.5 | 7 | 8 |
2.0 | 200 | 9.1 | 0.29 | 4.8 | 7 | 8 | |
2.5 | 250 | 9.4 | 0.32 | 5.4 | 7 | 8 | |
3.0 | 300 | 9.8 | 0.35 | 5.9 | 7 | 9 | |
3.5 | 350 | 9.8 | 0.38 | 6.4 | 8 | 9 | |
4.0 | 400 | 9.8 | 0.41 | 6.8 | 9 | 10 | |
4.5 | 450 | 9.4 | 0.43 | 7.2 | 10 | 11 | |
2.0 •
Blue
|
1.7 | 170 | 10.1 | 0.32 | 5.4 | 6 | 7 |
2.0 | 200 | 10.1 | 0.35 | 5.8 | 7 | 8 | |
2.5 | 250 | 10.1 | 0.39 | 6.5 | 8 | 9 | |
3.0 | 300 | 10.4 | 0.43 | 7.2 | 8 | 9 | |
3.5 | 350 | 10.4 | 0.47 | 7.8 | 9 | 10 | |
4.0 | 400 | 10.4 | 0.50 | 8.3 | 9 | 11 | |
4.5 | 450 | 10.4 | 0.53 | 8.8 | 10 | 11 | |
2.5 •
Blue
|
1.7 | 170 | 10.1 | 0.39 | 6.6 | 8 | 9 |
2.0 | 200 | 10.4 | 0.43 | 7.1 | 8 | 9 | |
2.5 | 250 | 10.7 | 0.48 | 8.0 | 8 | 10 | |
3.0 | 300 | 10.7 | 0.54 | 8.9 | 9 | 11 | |
3.5 | 350 | 10.7 | 0.58 | 9.7 | 10 | 12 | |
4.0 | 400 | 10.7 | 0.62 | 10.4 | 11 | 13 | |
4.5 | 450 | 10.7 | 0.66 | 11.1 | 12 | 13 | |
3.0 •
Blue
|
1.7 | 170 | 10.7 | 0.50 | 8.4 | 9 | 10 |
2.0 | 200 | 10.7 | 0.54 | 9.1 | 10 | 11 | |
2.5 | 250 | 11.0 | 0.61 | 10.2 | 10 | 12 | |
3.0 | 300 | 11.6 | 0.68 | 11.4 | 10 | 12 | |
3.5 | 350 | 11.9 | 0.74 | 12.3 | 10 | 12 | |
4.0 | 400 | 11.9 | 0.79 | 13.2 | 11 | 13 | |
4.5 | 450 | 11.9 | 0.84 | 14.0 | 12 | 14 | |
4.0 •
Blue
|
1.7 | 170 | 11.3 | 0.68 | 11.3 | 11 | 12 |
2.0 | 200 | 11.6 | 0.73 | 12.2 | 11 | 13 | |
2.5 | 250 | 11.9 | 0.81 | 13.6 | 12 | 13 | |
3.0 | 300 | 12.2 | 0.90 | 15.0 | 12 | 14 | |
3.5 | 350 | 12.2 | 0.97 | 16.2 | 13 | 15 | |
4.0 | 400 | 12.5 | 1.04 | 17.3 | 13 | 15 | |
4.5 | 450 | 12.5 | 1.10 | 18.3 | 14 | 16 | |
5.0 •
Blue
|
1.7 | 170 | 11.3 | 0.84 | 14.0 | 13 | 15 |
2.0 | 200 | 11.6 | 0.91 | 15.2 | 14 | 16 | |
2.5 | 250 | 11.9 | 1.02 | 17.1 | 15 | 17 | |
3.0 | 300 | 12.8 | 1.14 | 19.0 | 14 | 16 | |
3.5 | 350 | 12.8 | 1.24 | 20.6 | 15 | 17 | |
4.0 | 400 | 12.8 | 1.32 | 22.1 | 16 | 19 | |
4.5 | 450 | 12.8 | 1.41 | 23.4 | 17 | 20 | |
6.0 •
Blue
|
1.7 | 170 | 11.6 | 1.01 | 16.8 | 15 | 17 |
2.0 | 200 | 11.9 | 1.09 | 18.2 | 15 | 18 | |
2.5 | 250 | 12.2 | 1.22 | 20.4 | 16 | 19 | |
3.0 | 300 | 13.1 | 1.36 | 22.7 | 16 | 18 | |
3.5 | 350 | 13.1 | 1.47 | 24.5 | 17 | 20 | |
4.0 | 400 | 13.4 | 1.57 | 26.2 | 18 | 20 | |
4.5 | 450 | 13.4 | 1.67 | 27.9 | 19 | 21 | |
8.0 •
Blue
|
1.7 | 170 | 11.3 | 1.35 | 22.5 | 21 | 25 |
2.0 | 200 | 11.9 | 1.46 | 24.3 | 21 | 24 | |
2.5 | 250 | 12.5 | 1.63 | 27.2 | 21 | 24 | |
3.0 | 300 | 13.4 | 1.81 | 30.2 | 20 | 23 | |
3.5 | 350 | 13.7 | 1.95 | 32.6 | 21 | 24 | |
4.0 | 400 | 14.0 | 2.09 | 34.8 | 21 | 25 | |
4.5 | 450 | 14.0 | 2.22 | 36.9 | 23 | 26 | |
Notes: |
PGP Ultra / I-20 Grey Low Angle Nozzle Performance Data |
|||||||
---|---|---|---|---|---|---|---|
Nozzle | Pressure | Radius | Flow | Precip mm/hr | |||
bar | kPa | m | m³/hr | l/min | |||
2.0
LA •
Grey
|
1.7 | 170 | 7.3 | 0.33 | 5.6 | 12 | 14 |
2.0 | 200 | 7.6 | 0.36 | 6.0 | 12 | 14 | |
2.5 | 250 | 7.9 | 0.40 | 6.7 | 13 | 15 | |
3.0 | 300 | 8.2 | 0.45 | 7.4 | 13 | 15 | |
3.5 | 350 | 8.5 | 0.48 | 8.0 | 13 | 15 | |
4.0 | 400 | 8.8 | 0.52 | 8.6 | 13 | 15 | |
4.5 | 450 | 9.1 | 0.55 | 9.1 | 13 | 15 | |
2.5
LA •
Grey
|
1.7 | 170 | 7.9 | 0.44 | 7.3 | 14 | 16 |
2.0 | 200 | 8.2 | 0.47 | 7.9 | 14 | 16 | |
2.5 | 250 | 8.8 | 0.53 | 8.8 | 14 | 16 | |
3.0 | 300 | 9.4 | 0.59 | 9.8 | 13 | 15 | |
3.5 | 350 | 10.1 | 0.64 | 10.6 | 13 | 15 | |
4.0 | 400 | 10.4 | 0.68 | 11.3 | 13 | 15 | |
4.5 | 450 | 10.7 | 0.72 | 12.0 | 13 | 15 | |
3.5
LA •
Grey
|
1.7 | 170 | 8.5 | 0.58 | 9.7 | 16 | 18 |
2.0 | 200 | 8.8 | 0.62 | 10.3 | 16 | 18 | |
2.5 | 250 | 9.1 | 0.68 | 11.4 | 16 | 19 | |
3.0 | 300 | 10.1 | 0.75 | 12.5 | 15 | 17 | |
3.5 | 350 | 10.7 | 0.80 | 13.3 | 14 | 16 | |
4.0 | 400 | 11.0 | 0.85 | 14.1 | 14 | 16 | |
4.5 | 450 | 11.3 | 0.89 | 14.8 | 14 | 16 | |
4.5
LA •
Grey
|
1.7 | 170 | 8.2 | 0.71 | 11.8 | 21 | 24 |
2.0 | 200 | 8.8 | 0.76 | 12.7 | 19 | 23 | |
2.5 | 250 | 9.1 | 0.84 | 14.1 | 20 | 23 | |
3.0 | 300 | 10.1 | 0.93 | 15.5 | 18 | 21 | |
3.5 | 350 | 10.7 | 1.00 | 16.6 | 18 | 20 | |
4.0 | 400 | 11.0 | 1.06 | 17.6 | 18 | 20 | |
4.5 | 450 | 11.3 | 1.12 | 18.6 | 18 | 20 | |
Notes: |