WATERSENSE® SMART WATERING CONTROLLER BY ADDING WAND By adding WAND Wi-Fi Module to your X2 controller, it connects to Hydrawise Predictive Watering™ allowing the system to adjust schedules based on forecasted temperature, rainfall probability, wind and humidity to provide the maximum water savings.
EASY RETRIEVE® MEMORY A manual back-up utility that stores complete controller scheduling and setup information in back-up memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season.
PROGRAMMABLE RAIN DELAY The Programmable Rain Delay feature incorporates a user specified number of days to keep the controller in the OFF mode, then allows for the system to automatically revert back to scheduled irrigation. This will prevent watering during an extended period of inclement weather, but will resume watering automatically without requiring a return visit to the controller. The controller
displays the number of days remaining before watering resumes. QUICK CHECK™ The QuickCheck feature makes field wiring issues easy to assess with the push of a button. QuickCheck displays an ERR message when a field wiring short is detected on a particular station number.
NON-VOLATILE MEMORY This feature offers protection against unreliable power, retaining current time, date, and program data.
AUTOMATIC SHORT CIRCUIT PROTECTION Automatic short circuit protection is a feature found in all Hunter AC powered controllers. This feature automatically detects electrical faults, which are typically caused by wiring issues. Only affected stations are skipped, allowing all other stations to water normally as programmed. There are no fuses to blow or internal circuit breakers to trip, so complete irrigation system shutdown is avoided.
SEASONAL ADJUSTMENT: GLOBAL This feature allows for quick adjustments to irrigation run times through a percentage scale. During peak season, set the seasonal adjustment to 100%. If weather conditions require less water, enter the appropriate percentage value (i.e. 50%) to cut down irrigation run times without the need to adjust each station in the program. The Global provides Seasonal Adjustment percentage to all station Run Times on all of the controller's Programs.
DELAY BETWEEN STATIONS Users can program a delay between stations as the controller advances from one station to the next. delay can range from a few seconds (to permit slow-closing valves additional time to close) to a much longer period of time (to allow pressure tanks time to recharge), based on user requirements.